manualshive.com logo in svg

Kaba ILCO FDU, User Manual, Page: 72 / 276

Share
Download
Kaba ILCO FDU User Manual Download Page 72

Front Desk Units - Using and Programming 

Kaba Ilco Lodging Access Control System 

 

61

Shortcut: 

Swipe a GMA keycard, press 7, 2, 2, 2 and 3 

Default: 

Disabled: No time restrictions on staff access. 

Options: YES: 

Enabled 

NO: Disabled 

AUTO:  Automatic (only for “Timezone” when “Enable Fixed Tz” is set to YES) 

By default the “Enable Fixed Tz” is set to NO, indicating that the staff has access to 
the specific areas encoded on their card 24 hours a day. 

If the “Enable Fixed Tz” option is set to YES, specify YES, NO or AUTO for each 
Timezone. 

If the Time Zone is to be offered each time a keycard is made, enter YES. The user 
will be prompted for each keycard being encoded as to whether or not each Timezone 
set to YES is to be encoded on the keycard or not. 

 If the Time Zone is not to be offered, enter No (no staff will have access during that 
Time Zone). 

If the Time Zone is to be encoded automatically on all staff keycards, enter AUTO (all 
staff will have access during that Time Zone. 

Notes:

Do not press < > after each entry. Press the up <

S

> or down <

T

> arrow keys to 

select the Time Zone and the left <

W

> or right <

X

> arrow to choose between, YES, 

No and AUTO. Press < > to save the changes or <

> to return to the previous 

menu. 

The locks function on internal time only, and do not know when time changes from 
Standard Time to Daylight Savings Time. Fixed time zones are actually five hours 
long to compensate for the time change. In Standard time, keycards will be valid 
from one hour before the start of the selected time zone to the exact end time of the 
time zone. In Daylight Saving time, keycards will be valid from the exact start time 
until one hour following the end of the selected Time Zone (see figure 4.6.7-1). 

Summary of Contents for ILCO FDU





















































































































































































































































































Reviews:

No comments