manualshive.com logo in svg

Kaba ILCO FDU, User Manual, Page: 71 / 276

Share
Download
Kaba ILCO FDU User Manual Download Page 71

Chapter 3 

60

Kaba Ilco Lodging Access Control System

Common Area available. 

If the Common Area is to be offered each time a keycard is made, enter YES. For each 
keycard being encode the user will be prompted as to whether or not access to that 
specific Common Area is to be provided. 

If the area is not to be offered, enter No for the specific common area. 

If the area is to be encoded automatically on all staff keycards, enter AUTO for the 
specific common area. 

Notes:

Do not press < > after each entry. Press the up <

S

> or down <

T

> arrow keys to 

select the Common Area and the left <

W

> or right <

X

> arrow to choose between, 

YES, NO and AUTO. Press < > to save the changes or <

> to return to the 

previous menu. 

3.6.7. Time Zones 

3.6.7.1 Fixed Time Zones 

Purpose: 

There are six fixed time zones that can be used to limit staff access to any lock in the 
system, except for the RAC Model 3.5, 4 & 4XT Card Readers

 (see Section 3.6 part 

7.2 – Flexible Time Zones)

.

 

Time zone 0 

        

00:00 to 04:00 hrs  

 

Time zone 4 

        

04:00 to 08:00 hrs  

 

Time zone 8 

        

08:00 to 12:00 hrs  

 

Time zone 12            

12:00 to 16:00 hrs  

 

Time zone 16            

16:00 to 20:00 hrs  

 

Time zone 20           

20:00 to 24:00 hrs 

Each time zone may be given to all staff, to certain staff, or to no staff. When a time 
zone is encoded on a staff keycard, the locks grants access only during the Time Zone 
period. More than one Time Zone can be encoded on a staff keycard. 

Summary of Contents for ILCO FDU





















































































































































































































































































Reviews:

No comments