22
5-2 Installing the V.NETWORKS Setup Tool
Execute the \JVC\setup\Setup.exe file on the CD-ROM, and then complete
the installation as directed by the messages on the screen.
6. Setting the V. NETWORKS Setup Tool
When installation is completed, select
Start
-
Program
-
V.NETWORKS
to invoke the
VN-C30U Setup Tool
.
Enter the VN-C30U IP address.
The factory default IP address
192. 168. 0. 2
Settings are updated at the
time when "
OK
" is clicked.
For alarm
settings,
see page 26.
Resets the
image.
Select the compression method for the
camera image.For details on the setting, see
page 23.
The camera ID corresponds to the
identification code located on the
VN-C30U body. Only alphanumerics
can be entered.
The user does not participate
directly.
Normally, consecutive numbers
such as CAM00001, CAM00002.....
will be set.
Resets the
V N - C 3 0 U
unit.
For setting of
password,
see page 30.
Set the subnet
mask to a value
suitable for the
settingoperation.
If the value is
unknown,
check with the
network manager.
Change to an IP
address assigned
or approved by
t h e n e t w o r k
administrator.
(
192. 168. 0. 2
i s u s e d a s a n
example in the
diagram.)
