31
6-4 Making the set IP address valid
When the IP address is changed, the pan and tilt mechanism will work
and the IP address becomes valid after the VN-C30U is reset.
Restoring a work PC IP address
Using the same procedure as in 4-1, select
Settings
from the
Start
button,
then select
Control Panel
and
Network
, Change to the original TCP/IP prop-
erties setting that you made a note and then restore a work PC IP address.
After restoration is completed, follow the messages of OS and reboot the
PC.
Search function
The Search button is used to find the V.NETWORKS IP addresses currently
connected to the network.
When Search button is pressed, the Search screen will be displayed. When
Start Search button is pressed, a list of the V.NETWORKS IP addresses
currently connected to the network will be displayed. Timeout is used to
set the search time and can be set to 0 - 30 sec.
Caution
When your own PC and a V.NETWORKS of a different subnet are
connected on a LAN, connection will not be possible even if the
search is successful.
In such cases, change to an appropriate IP address on your PC and
then try connection.
Caution
The V.NETWORKS Setup Tool is software that is only required when the
setup is performed. Therefore, please uninstall the software following
completion of the setup unless there is special reason for leaving it on
the PC. When setting the second or following units, reboot the PC and
then return to 2 (page 15). After setting of all the VN-C30U units is
completed, proceed with the next procedure.
6-5 Special Notes on the V.NETWORKS Setup Tool
