46
To enable the Alarm 1, Alarm 2 and/or
Relay Alarm settings, it is necessary
to check (
✔
) Alarm reg.
Relay alarm setting
When relay alarm setting is performed using
the V.NETWORKS Setup Tool, this window
becomes active.
The program to be executed and the wave
file to be played back when a relay alarm is
generated can be set in advance.
(For these items, please see the previous
page.)
Caution
• When a large wave file (*.wav) is selected, the alarm operation may be
delayed depending on the PC specifications. Try to select a relatively
small wave file.
• In order to enable the Alarm 1, Alarm 2 and/or Relay Alarm setting it is
necessary to
1) Select "ON" in Alarm 1, Alarm 2 and/or Relay Alarm setting of
V.NETWORKS setup tool (refer to page 27),
and
2) Check (
✔
) Alarm reg.
• When relay alarm has been set, the second alarm operations is not
performed.
Example:
When the Relay Alarm occurs in the sequence of
Alarm 1 Alarm 2, alarms operate in the sequence of
Alarm 1 Relay Alarm and Alarm 2 does not operate at all.
