JVC KY-PZ100BE Instructions Manual Download Page 101

Page: 101 / 116

Error Messages and Actions

Warning display on the externally-connected display screen or the Live View screen, tally lamp indication

and warning tone are displayed or output according to the error status as shown in the table below.
Memo :

This camera recorder makes use of a microcomputer. Noise interference from external sources may

prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder

again.

Error Message

Status

Action

Turn Power Off Turn Back On

Later

System error.
* The tally lamp blinks twice every

second.

Turn off the power, and turn it on

again.

If the error persists, please contact

the local dealers in your area.

Media Was Removed.

Card is removed while recording

is in progress.

Card is removed while

formatting is in progress.

Card is removed while restoring

is in progress.

Card is removed while adding

the OK mark.

Card is removed while writing a

setup file.

Card is removed while deleting a

clip.

Restore the card using this camera

recorder.

(

P28 [Restoring the microSD

Card] )

Media Full

[REC] button is pressed when

the media in use has no

remaining space.

Remaining space ran out during

recording.

Replace the microSD card with a

new one.

No Media

[REC] button is pressed when a

microSD card is not inserted.

Insert a microSD card.

(

P27 [Inserting an microSD

Card] )

List of FTP Transfer Errors

If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully

completed, the following errors are displayed.

Error message

Status

Action

Timeout.

Transfer was discontinued due to

timeout caused by network

transmission or server failure.

Execute again.

Use a different server.

Media Was Removed.

microSD card is removed while FTP

transfer is in progress.

Insert the microSD card and

execute FTP transfer again.

Adapter Was Removed.

The USB network device is

removed while FTP transfer is in

progress.

Connect the USB network device.

Cannot Connect to Server.

Unable to connect to the FTP server. Adjust the Server and Port settings

for [Metadata Server] or [Clip

Server].

(

P64 [ Metadata Server ] )

(

P63 [ Clip Server ] )

Error Messages and Actions

101

Others

Summary of Contents for KY-PZ100BE





















































































































Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands

JVC KY-PZ100BE, Instructions Manual

Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands