Tally Lamp
This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp appears blinking such as when the
remaining level of the microSD card is running low,
or when a system error occurs on the camera.
* To configure the setting, go to [Main Menu]
B
[System]
B
[Tally Lamp].
.
Tally lamp
Memo :
0
Blinking takes priority over lighting up.
0
You can adjust the brightness of the tally lamp
in [Main Menu]
B
[System]
B
[Tally Lamp]
B
[Brightness].
0
When [System]
B
[Loop Rec] is set to “On”,
alarm and warning displays when there is
insufficient or no microSD card space will not be
shown.
0
When [Main Menu]
B
[System]
B
[Tally Lamp]
is set to “External” or “Off”, alarm and warning
displays when there is insufficient or no microSD
card space will not be shown.
Display Type
Set Status
Menu Setting
Tally Lamp Status
Information
Running with menu settings (recording/
live streaming/external control)
Other than “Off”
Lights up
Alarm
If power supplied from the LAN terminal is
not PoE+
None
Blinks once in 1
second
Insufficient space inside microSD card
(Remaining recording time is less than 3
minutes)
0
Record
0
Record/Live
streaming
Live streaming communication error
or waiting to be connected
0
Live streaming
0
Record/Live
streaming
Warning
System error
None
Blinks twice in 1
second
Tally Lamp
25
Gettin
g Started
