Metadata Server
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
9
Meta-FTP1 to Meta-FTP4
(The name specified in the respective
[Alias] items is displayed)
o
Alias
For setting a name to distinguish the settings of
this camera recorder.
The name set in this item will be displayed in the
[Import Metadata] options.
* Enter not more than 31 characters.
o
Protocol
For setting the protocol of the FTP server to be
connected.
0
FTP:
Protocol that does not encrypt the incoming
and outgoing data.
0
SFTP:
Protocol that encrypts incoming and outgoing
data using SSH.
0
FTPS:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit
mode (starts encrypted communication once
connection starts).
0
FTPES:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit
mode (starts encrypted communication after
permission is granted).
[Setting Values:
R
FTP, SFTP, FTPS, FTPES]
o
Server
For setting the server name (“mystation.com”,
etc.) or the IP address (“192.168.0.1”, etc.) of the
FTP server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o
Port
Enter the FTP server port number to use using
an integer between 1 and 65535.
The default value varies with the Protocol
setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
o
File Path
Enter the path name for the metadata file (“/pub/
meta.xml”, “/home/user/meta2.xml”, etc.)
* Enter not more than 127 characters.
o
Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o
Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
o
PASV Mode
For setting whether to set the communication
mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and
a connection from the FTP server to the camera
cannot be established.
[Setting Values: On,
R
Off]
Memo :
0
When [Protocol] is set to “SFTP”, this item
appears as “---” and cannot be selected.
9
Import Metadata
0
For importing metadata from the FTP server.
0
Metadata loaded by the setup files will be
deleted.
Memo :
0
This option is not available when [Network] is set
to “Off”.
Reset Network Settings
Restores all items in the [Network] menu to their
default settings.
64
Network Menu
Menu
Display and
D
etailed
S
etti
ngs
