JVC KY-PZ100BE Instructions Manual Download Page 62

Page: 62 / 116

Password

For setting the password.

There is no default value (blank).

* Enter not more than 127 characters. Enter not

more than 31 characters for RTSP/RTP setting.

Latency

For setting the latency mode.

[Setting values: Minimun(ZIXI Off),

Low,

Medium, High]

Adaptive Bit Rate

If “On” is selected, the bit rate setting value of

live streaming is set to maximum limit, and the

bit rate is changed automatically according to

changes in the network bandwidth.

[Setting Values: On,

Off]

Memo :

[Adaptive Bit Rate] is selectable when [Type] is

set to “ZIXI” and [Latency] is set to a value other

than “Minimun(ZIXI Off)”.

* The bit rate is displayed on the status screen

only when “On” is set.

SMPTE 2022-1 FEC

Set to “On” to use FEC (Forward Error

Correction).

A transmission system that recovers the missing

packets in the decoding process without having

to retransmit the missing packets.

[Setting Values: On,

Off]

* The decoder must be compatible with SMPTE

2022-1.

FEC Matrix

For setting the amount of FEC (Forward Error

Correction) overhead for configuring

SMPTE2022-1.

(

P100 [Setting the FEC Matrix] )

Memo :

This item is selectable only when [SMPTE

2022-1 FEC] is set to “On”.

Resolution

For setting the resolution of the video image during

live distribution.

The selectable options vary according to the

System Mode setting.

System Mode

Setting Value

(

: default value)

1080/60

1080/50

1920x1080

1280x720
640x360

720/60

720/50

1280x720

640x360

Frame Rate

For setting the frame rate of the video image during

live distribution.

The selectable options vary according to the

settings in [System Mode] and [Resolution] .

System Mode

Resolution

Setting Value

1080/60

1920x1080

1280x720

640x360

60p, 60i, 30p

1080/50

50p, 50i, 25p

720/60

1280x720

640x360

60p, 30p

720/50

50p, 25p

Memo :

The setting cannot be changed during live

streaming (Live Streaming set to “On”).

Bit Rate

For setting the bitrate of the video image during live

distribution.

The selectable options vary according to the

settings in [System Mode], [Resolution] and

[Frame Rate].

For details on the settings, please refer to [[Live

Streaming Set] Combinations that Support

Distribution] (

P 98).

Memo :

The setting cannot be changed during live

streaming (Live Streaming set to “On”).

Depending on the type of network adapter used

and the connection, the images and audio

sound during live streaming can be choppy.

Network Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for KY-PZ100BE





















































































































Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands

JVC KY-PZ100BE, Instructions Manual

Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands