3
Tap “Wi-Fi SETTING”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
ACCESS POINTS
Wi-Fi SETTING
5
Tap “ADD”.
(Operation on this camera)
.
ADD
ACCESS POINTS
SET
6
Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
EZ REGISTRATION WPS
ADD
7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
0
To activate WPS, refer to the instruction manual of the device in use.
8
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
OK
WPS
WPA2
ENCRYPTION METHOD
SSID:********************************
REGISTERED
0
The following registration methods are also available.
“Registering Access Point Using WPS PIN” (
“Registering Access Point Manually” (
o
Regular Operation
Connecting the Camera to the Smartphone
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪
PLAY
MENU
0
The top menu appears.
2
Tap the “Wi-Fi” (
Q
) icon.
(Operation on this camera)
.
OFF
SETUP
TOP MENU
Wi-Fi
SETTING
RECORD
SETTINGS
CONNECTION
3
Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)
.
Wi-Fi
Wi-Fi SETTING
ACCESS POINT
CONNECTION
CONNECTION
DIRECT
4
Start making a connection.
(Operation on this camera)
.
STOP
SSID:********************************
CONNECTING
OUTDOOR MONITORING
0
Name (SSID) of the access point (wireless LAN router) in connection
is displayed.
5
The following is displayed when the camera is connected to the access
point.
.
REC
0:00:00 [2:04]
0:00:00 [2:04]
INFO.
STOP
ACCESS POINT CONNECTION
0
Tapping “INFO.” displays the URL (WAN) for connecting the
smartphone.
(Does not appear if DDNS is not set or set incorrectly.)
0
“
L
UPnP” is displayed when UPnP cannot be used.
Using Wi-Fi by Creating a QR Code
141