57
Clip Set
→
&OLS1DPH3UH¿[
)RUVHWWLQJWKH¿UVWIRXUFKDUDFWHUVRIWKHQDPH
RIWKHFOLS¿OHWREHUHFRUGHGWRWKH6'FDUG
Enter any of the 36 characters including
alphabets (upper case) and numbers (0 to 9)
using the software keyboard.
→
Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button to reset
the number.
When [ Format] is set to “AVCHD”, the clip
number is reset to “00000”.
When other clips exist on the SD card, the
smallest available number is used after reset.
●
Example:
,IWKH>&OLS1DPH3UH¿[@LV³$%&'´DQG
“ABCD0001” already exists on the SD card,
“ABCD0002” will be assigned.
ABCG0001
Clip Number
A number in automatic
ascending order is assigned in
the recording order.
The Clip Number can be reset
by using "Reset Clip Number".
Clip Name Prefix (any four alphanumeric
characters)
This is set to “xxxG” (“xxx” denotes the last 3
digits of the serial number) by default.
Example: In the case of QuickTime
Memo :
●
Before recording starts, you can set any
FKDUDFWHUVIRUWKHFOLSQDPHSUH¿[E\XVLQJ
>&OLS1DPH3UH¿[@
●
Changes cannot be made after recording.
Memo :
●
When [Main Menu]
[System]
[Record Set]
[Record Format]
[ Format] is set to
³$9&+'´WKLVVHWWLQJLVQRWUHÀHFWHGLQWKH
¿OHQDPHRIWKHFOLS
However, it is recorded as the display name
of the clip in the thumbnail display.
Clip (Recorded Data) and Clip Name
●
When recording is stopped, the images,
audio
and accompanying data which are
recorded from start to stop are recorded as
one “clip” on the SD card.
●
An 8-character clip name is automatically
generated for the recorded clip.
³&OLS1DPH3UH¿[´³&OLS1XPEHU´
●
When [Main Menu]
[System]
[Record Set]
[Record Format]
[ Format]
is set to
“AVCHD”, the clip name generated consists
of only the Clip Number (5-digit number).
C D
C D
C D
Summary of Contents for GW-SP100E
Page 72: ...72 ʸʻʹʿƖʷʷ 2015 B5A 0533 10 ...
