40
●
Press the [USER3] button once again to
return to the scan range selection screen
(initial screen).
4 Press the Set button.
●
While the brightness is displayed, you can
use the
▲
/
▼
buttons to change the scan
range.
●
If you press the [USER3] button again, the
item for setting the scan range appears as a
VFUROOLQJOLVWRQWKHEULJKWQHVVFRQ¿UPDWLRQ
screen.
Recording
Simultaneously
DW7ZR'LIIHUHQW'H¿QLWLRQV
By setting [System] to “4K+HD”, you can record
VLPXOWDQHRXVO\DWWZRGLIIHUHQWGH¿QLWLRQV
●
When 4K+HD is selected:
5HFRUGVXOWUDKLJKGH¿QLWLRQ.LPDJHVWR
VORW$DQGKLJKGH¿'LPDJHVWRVORW%
at the same time.
7KH+'YLGHR¿OHFDQEHXVHGDVWKHSUR[\
¿OHIRUWKH.LPDJH¿OH
7KHELWUD'YLGHR¿OHLVHTXLYDOHQW
to "UHQ".
Memo :
●
If a recordable SD card is inserted into only
one of the slots, images will only be recorded
to that slot.
●
When recording to one slot is in progress,
inserting a recordable media to the other slot
does not enable recording simultaneously
DWWZRGLIIHUHQWGH¿QLWLRQV7RSHUIRUPWKLV
operation, stop recording temporarily, and
start again.
●
When one of the cards is accidentally
removed while recording is in progress,
recording to the card in the other slot will
continue. However, repair of the accidentally
removed card by the recovery function may
fail.
●
If an error occurs on one of the cards while
recording is in progress,recording of the
erroneous card stops, while that of the other
card continues.
Caution :
●
Slot B and slot D cannot be used.
●
[Slot Mode] cannot be selected.
●
Clip Cutter Trig is disabled.
●
7RSOD\DQ+'¿OHVHW>6\VWHP@WR+'VHW
[ Format] to "Quick Time", set [ Bit
Rate] to "XHQ" or "UHQ", and use slot C or D.
C D
C D
Summary of Contents for GW-SP100E
Page 72: ...72 ʸʻʹʿƖʷʷ 2015 B5A 0533 10 ...
