JVC GW-SP100E, Instructions Manual

Page: 68 / 72

68
(*) Future upgrade will allow use of this.
Camera Unit
Item Description
Image pickup
device Super 35mm
13.5 megapixels (CMOS)
Lens Mount Micro Four Thirds Mount
Gain 0dB, 3dB, 6dB, 9dB, 12dB,
15dB, 18dB, 21dB, 24dB,
Lolux (30dB, 36dB), ALC
Electronic
shutter 1/6 to 1/10000, EEI
Terminal Section
Item Description
SDI Output
Terminal BNCx4
3G-SDI :
Compliant with
SMPTE ST424
HD-SDI :
Compliant with
SMPTE ST292
HDMI Output
Terminal HDMI TypeA
SDI(Moni)
Output
Terminal BNC
3G-SDI :
Compliant with
SMPTE ST424
HD-SDI :
Compliant with
SMPTE ST292
AV Output
Terminal 4-pin 3.5 mm mini jack
Video : 1.0V(p-p)
Audio : 300mV(rms), 1k
Ω
6SHFL¿FDWLRQV
General
Item Description
Power Using battery pack :
DC 7.4 V (IDX)
Using AC adapter :
DC 11 V - 17V
Power
consumption Approx. 29.6 W (*1)
(When the signal transmission
cable(KA-SC001G) is used)
Approx. 37.0 W (*1)
(When the camera unit cable
(KA-CC010G) is used)
Allowable
operating
temperature 0 °C to 40 °C
(32 °F to 104 °F)
Allowable
operating
humidity 30 %RH to 80 %RH
Allowable
storage
temperature -20 °C to 50 °C
(-4 °F to 122 °F)
Item Description
[INPUT1/
INPUT2]
terminal 0,&G%XNȍ
XLR (balanced), +48 V
output (phantom power
supply)
/,1(G%XNȍ
XLR (balanced)
AUX
Terminal 3.5 mm stereo mini jack
-22dBu, 10 k
Ω
USB
Terminal DEVICE : Mini USB-B type,
USB 2.0, slave function
(mass storage class) only
HOST(*) : USB-A type,
USB2.0
Headphone
terminal 3.5 mm mini jack (stereo)
Remote 1
Terminal 6-pin Mini DIN
Remote 2
Terminal φ 2.5 mm wired remote
control
Remote 3
Terminal (*) 3-pin 2.5 mm mini jack
Genlock
Terminal 1.0 V(p-p), 75
Ω
TC Input
Terminal 1.0 V(p-p) to 4.0 V(p-p)
high impedance
TC Output
Terminal 2.0 V(p-p)
low impedance
Gimbal Control
Terminal(*) 3.0V ± 5%(p-p)
DC INPUT
Terminal XLR 4-pin
(*1) When [System] is set to "4K".