JVC Connected Cam GY-HC900CHE Instructions Manual Download Page 148

Page: 148 / 236

System Menu

This menu screen allows system-related settings.

For configuring recording settings, formatting and

restoration of a recording media, tally lamp setting,

date/time, time zone and other settings.

It can also be used to reset the menu settings to

their default values.

Record Set...

For specifying recorded video-related settings.

(

P151 [Record Set Item] )

Media

Format Media

For formatting (initializing) a recording media.

Select a card slot, select [Format] from [Cancel]/

[Format], and press the [STATUS/SET] button (

)

to format (initialize) the card.

(

P50 [Formatting (Initializing) SD Cards] )

Restore Media

For restoring a recording media.

Select a card slot, and press the [STATUS/SET]

button (

) to restore the SD card.

(

P51 [Restoring the SD Card] )

Memo :

This item appears only when the recording

media needs to be restored. However, it is not

selectable when recording in Camera mode and

during Clip Review.

Setup File

This allows you to save the menu settings as well

as the performance results of shutter speed and

AWB.

It is useful to save settings according to different

shooting conditions.

Load File...

Loads the settings.

(

P177 [Loading a Setup File] )

Store File...

Saves the settings.

(

P176 [Saving Setup Files] )

Delete File...

Deletes the configured file.

(

P178 [Deleting Setup Files] )

Tally System

For setting the display conditions of the tally lamp

(front and back) on the camera recorder.

Internal:

Displays mainly the status of the camera

recorder.

Studio:

Displays the TALLY IN/PREVIEW IN signals

from an external device, such as a remote

control unit.

[Setting Values:

Internal, Studio]

Front Tally/Back Tally

For configuring how the front and back tally lamps

on this camera recorder are illuminated when [Tally

System] is set to “Internal” and while recording is in

progress, when a remaining level warning is

displayed or during live streaming.

Rec/Live Streaming:

Lights up during recording or live streaming.

Live Streaming:

Lights up during live streaming. Does not light

up during recording.

Rec:

Lights up during recording.

[Setting Values: Rec/Live Streaming, Live

Streaming,

Rec]

Memo :

When [Tally System] is set to “Studio”, this item

appears as “---” and selection is disabled.

GPS

For setting the GPS function to On or Off (power

on/off).

[Setting Values: On,

Off]

Memo :

When [A/V Set]

[Video Set]

[SDI OUT1

Res.] is set to “1080p”, configuring [System]

[GPS] to “On” changes the setting to “1080i”.

148

System Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for Connected Cam GY-HC900CHE













































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands

JVC Connected Cam GY-HC900CHE, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands