JVC Connected Cam GY-HC900CHE Instructions Manual Download Page 32

Page: 32 / 236

Attaching the Wireless LAN Antennas

(Supplied)

Attach the wireless LAN antenna by turning it in the

clockwise direction. Hold the base while attaching

the antenna.

Caution :

Applying force to the wireless LAN antenna or

yanking it may damage the antenna so please

use caution when using the antenna.

If it is damaged, replacement is chargeable even

during the warranty period.

(Part number: T9A-0095-00)

Use the antenna holders without removing

them.

Attaching the Tripod (Sold Separately)

Mount this camera recorder after attaching the

KA-551U tripod base unit (sold separately) to the

tripod.

To prevent the camera recorder from falling off,

which may result in injuries or damages, read the

“INSTRUCTIONS” of KA-551U as well as that of

the tripod to be used to attach the camera recorder

securely.
Caution :

If the camera recorder exceeds the weight limit

of the tripod, do not mount it on the tripod.

Use the tripod on a stable surface.

Adjusting the Position of the Shoulder

Pad

Adjust the position of the shoulder pad back and

forth.

Release the lock of the lock lever and adjust

the position of the shoulder pad back and

forth.

Lock the lock lever and check that the

shoulder pad is fixed.

Lock Lever

Settings and Adjustments Before Use

ati

ons

Summary of Contents for Connected Cam GY-HC900CHE













































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands

JVC Connected Cam GY-HC900CHE, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands