CH1 Audio Level/CH2 Audio Level/CH3
Audio Level/CH4 Audio Level
9
Front, Rear/Wireless
For configuring the method for adjusting volume
level when the [MANUAL/AUTO] selection switch
of [AUDIO INPUT CH1 (/2/3/4)] is set to
“MANUAL”.
0
Front + CH1(/2/3/4):
Adjust using the [MIC LEVEL] knob on the front
and the [AUDIO INPUT CH1(/2/3/4)] recording
level adjustment knob.
0
CH1(/2/3/4) Knob:
Adjust using the [AUDIO INPUT CH1(/2/3/4)]
recording level adjustment knob.
0
Front Knob:
Adjust using the [MIC LEVEL] knob on the front.
[Setting Values: Front + CH1(/2/3/4), CH1(/2/3/4)
Knob, Front Knob]
(Default setting: “Front Knob” for Front, “CH1(/
2/3/4) Knob” for Rear/Wireless)
CH1/2 Audio Ref. Lv.
For setting the reference recording level of [CH1]
and [CH2].
(Applies to both [CH1] and [CH2].)
[Setting Values: -12dB, -18dB,
R
-20dB]
CH3/4 Audio Ref. Lv.
For setting the reference recording level of [CH3]
and [CH4].
(Applies to both [CH3] and [CH4].)
0
Ch1/2 -6 dB:
Sets to a value that is 6dB lower than that of
[CH1] and [CH2].
0
Ch1/2 -12 dB:
Sets to a value that is 12dB lower than that of
[CH1] and [CH2].
0
Ch1/2 Linked:
Sets to the same value as [CH1] and [CH2].
[Setting Values: Ch1/2 -6 dB, Ch1/2 -12 dB,
R
Ch1/2 Linked]
CH1/2 DRC..., CH3/4 DRC...
For configuring the individual parameters of DRC
(Dynamic Range Compression).
P72 [References on DRC (Dynamic Range
9
Threshold Level
For configuring the threshold of DRC for CH1/2 and
CH3/4.
[Setting Values:
R
-6dBFS, -9dBFS, -12dBFS,
-15dBFS, -17dBFS, Off]
9
Attack Time
For configuring the time before DRC for CH1/2 and
CH3/4 operates.
[Setting Values: Fast,
R
Middle, Slow]
9
Decay Time
For configuring the time before the DRC operation
for CH1/2 and CH3/4 is canceled.
[Setting Values: Fast,
R
Middle, Slow]
9
Mode
For configuring whether DRC for each channel
operates independently or in tandem with each
other.
([CH1] and [CH2], [CH3] and [CH4])
Select “Linked” to link or “Separate” to separate.
[Setting Values: Linked,
R
Separate]
Limitter...
9
CH1(/2/3/4)
For configuring whether to enable limiter operation
for each channel.
0
On:
Enables limiter operation.
0
Off:
Disables limiter operation.
0
AUTO/MANUAL SW Set:
Operates according to the [AUDIO INPUT
MANUAL/AUTO] selection switch.
Operation is “On” in the AUTO mode and “Off”
in the MANUAL mode.
[Setting Values: On, Off,
R
AUTO/MANUAL SW
Set]
136
A/V Set Menu
Menu
Display and
D
etailed
S
etti
ngs
Summary of Contents for Connected Cam GY-HC900CHE
Page 2: ...2 ...
