JVC Connected Cam GY-HC900CHE Instructions Manual Download Page 144

Page: 144 / 236

Alias

For setting a name to distinguish the settings of this

camera.

The name set in this item will be displayed in the

[Server] options.
*1 The default value is “Server1/Server2/

Server3/Server4”.

*2 You can enter up to 31 characters and ASCII

characters.

Type

For configuring the system for transferring video

and audio to be distributed.

[Setting Values:

RTSP/RTP, ZIXI

, Icecast]

Memo :

Operates as IFB when the setting is configured

to “Icecast”.

Use transmission devices that are compatible

with the respective transfer systems.

To use the “ZIXI” setting, a dedicated server is

needed separately.

The following items that can be set vary

depending on the setting of this item.

Protocol

For configuring the protocol of the video/audio

source server to be connected.

[Setting Values:

UDP, TCP]

Memo :

This item is selectable only when [Type] is set to

“RTSP/RTP”.

Source Address

For configuring details such as the host name and

IP address of the video/audio transmission source.

There is no default value (blank).
* You can enter up to 191 characters and ASCII

characters.

Source Port

Enter the network port number of the video/audio

transmission source using an integer between 1

and 65535.

The default value is “554” when [Type] is set to

“RTSP/RTP”, “2077” when it is set to “ZIXI”, and

“5000” when it is set to Icecast.
Memo :

When [Type] is set to “RTSP/RTP”, only even

numbers from 2 to 65530 can be specified for

the port number.

Stream ID

For configuring the stream ID registered on the

video/audio transmission source.

There is no default value (blank).
* Enter not more than 63 characters.
Memo :

This item is available for setting when [Type] is

set to “RTSP/RTP” or “ZIXI”.

Username

For setting the user name.

There is no default value (blank).
* Enter not more than 63 characters.
Memo :

This item is selectable only when [Type] is set to

“RTSP/RTP”.

Password

For setting the password.

There is no default value (blank).
* You can enter up to 31 characters when [Type]

is set to “RTSP/RTP”.

* You can enter up to 127 characters when [Type]

is set to “ZIXI”.

Memo :

This item is available for setting when [Type] is

set to “RTSP/RTP” or “ZIXI”.

Name

For configuring the name.

The default value is “HC900”.
* Enter not more than 31 characters.
Memo :

This item is selectable only when [Type] is set to

“ZIXI”.

Latency

For setting the latency mode.

[Setting Values: Medium,

Minimum, Off]

Memo :

This item is selectable only when [Type] is set to

“ZIXI”.

Mountpoint

Enter the mountpoint (character string for

identifying a stream) for streaming servers that

support multiple streams.

There is no default value (blank).
* Enter not more than 63 characters.
Memo :

This item is selectable only when [Type] is set to

“Icecast”.

144

Network Menu

Menu

Display and

etailed

etti
ngs

Summary of Contents for Connected Cam GY-HC900CHE













































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands

JVC Connected Cam GY-HC900CHE, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands