Juniper TCX1000-RDM20, Hardware Manual

Page: 93 / 206

CHAPTER 14
Connecting the TCX1000-RDM20 to
External Devices
• Connecting the TCX1000-RDM20 to a Management Ethernet Device on page 79
• Connecting the TCX1000-RDM20 to a Management Console on page 80
•
Connecting the TCX1000-RDM20 to the Network and External Devices on page 81
•
Installing and Connecting the TCX1000-RDM20 OSC SFP on page 82
Connecting the TCX1000-RDM20 to a Management Ethernet Device
You can monitor and manage the TCX1000-RDM20 by using a dedicated management
channel. Use the management port to connect the TCX1000-RDM20 to a network for
out-of-band management.
NOTE: You cannot use the management port to perform the initial
configuration of the TCX1000-RDM20. You must configure the management
ports through the console connection before you can successfully connect
to the TCX1000-RDM20 using the management ports. See
“Performing the
Initial Configuration for the TCX1000-RDM20” on page 86 .
Ensure that you have an appropriate cable available. See “Cable Specifications for Console
and Management Connections for the TCX1000-RDM20” on page 55 .
To connect a TCX1000-RDM20 to a network for out-of-band management (see
Figure 27 on page 80 ):
1.
Connect one end of the cable to the management port (labeled
DCN 0 or DCN 1
) on
the TCX1000-RDM20.
2.
Connect the other end of the cable to the management network device.
79 Copyright © 2019, Juniper Networks, Inc.