Juniper TCX1000-RDM20, Hardware Manual

Page: 94 / 206

Figure 27: Connecting a TCX1000-RDM20 to a Network for Out-of-Band Management
g009723
Management
network
To DCN 0/DCN 1 port
(on device)
Management PC
Management PC
Management PC
Related
Documentation
TCX1000-RDM20 Management Panel on page 14
•
•
Connecting the TCX1000-RDM20 to a Management Console on page 80
Connecting the TCX1000-RDM20 to a Management Console
The TCX1000-RDM20 has a console port (labeled SERIAL ) with a DB-9 connector.
Ensure that you have an RJ-45 to DB-9 rollover cable available.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to the TCX1000-RDM20, use a
combination of the RJ-45 cable and RJ-45 to DB-9 adapter and a USB to
DB-9 male adapter.
To connect the TCX1000-RDM20 to a management console:
1.
Connect one end of the RJ-45 to DB-9 rollover cable to the console port (labeled
SERIAL
). See Figure 28 on page 81 and Figure 29 on page 81 .
2.
Connect the other end of the cable directly to a management console or console
server.
Copyright © 2019, Juniper Networks, Inc. 80
TCX1000 Programmable ROADM Hardware Guide