Juniper TCX1000-RDM20, Hardware Manual

Page: 28 / 206

Table 8: TCX1000-RDM20 Port Status LEDs (continued)
Description State Color Name
Booster off. Off Unlit LINE OUT port status ( LINE
OUT
) LED
Booster on, internal fault. On steadily Red
Booster on, normal conditions. On steadily Green
Booster on, automatic power reduction
(APR) active. On steadily Yellow
Related
Documentation
TCX1000-RDM20 Management Panel on page 14
•
TCX1000-RDM20 Management Panel
The TCX1000-RDM20 management panel is found on the front panel (see
Figure 6 on page 14 ).
Figure 6: TCX1000-RDM20 Management Panel Components
g009705
1 2 3
4 5
4— 1— DCN 0 Ethernet port. Primary management
Ethernet port.
SERIAL DB-9 craft port to connect to a
management console.
5— 2— DCN 1 Ethernet port. Secondary
management Ethernet port.
ETH CRAFT RJ-45 (1000BASE-T)
management Ethernet port.
3— USB port. This port is not used.
You can use proNX Optical Director to manage the optical functionality provided by
TCX1000-RDM20s.
NOTE: See the proNX Optical Director Installation Guide for information on
how to install the proNX Optical Director software on supported servers, and
see the proNX Optical Director User Guide for more information on how to use
the proNX Optical Director to provision, monitor, and activate services on a
TCX1000 optical network. The proNX Optical Director documentation is
available at:
https://www.juniper.net/documentation/
Copyright © 2019, Juniper Networks, Inc. 14
TCX1000 Programmable ROADM Hardware Guide