Juniper TCX1000-RDM20, Hardware Manual

Page: 110 / 206

Table 33: FMD96 (BT8A78MD03) Specifications (continued)
Range Parameters
1360 nm 1310nm 1266 nm Wavelength (OSC, Line Port)
4
SMF-28 or equivalent Fiber Type
LC/UPC Connector
1
Relative to L1 In.
2
Relative to L1 Out.
3
The input power per client port must not exceed this limit to ensure that the optical safety on line output is within Class 1M
requirements.
4
For connection to ROADM client ports.
Installing a 96-Channel Fixed Mux/Demux (BT8A78MD03)
Use this procedure to install a 96-Channel Fixed Mux/Demux (FMD96).
The FMD96 is a standalone, passive module that is designed to be installed directly into
the following types of racks:
• 23-inch ANSI equipment rack
• 19-inch ANSI equipment rack
•
19-inch (410 mm) ETSI equipment rack
•
21-inch (500 mm) ETSI equipment rack
NOTE: The FMD96 is not NEBS-3 certified.
The FMD96 is shipped as a complete unit with hinged cover and latch, fiber support, and
21/23-inch mounting bracket attached. An installation kit with a 19-inch mounting bracket
and installation hardware is included with the FMD96.
Tools Required
•
Installation kit (included)
•
Grounding cable
•
Grounding cable connector to ground source
• Number 2 Phillips screwdriver (for ground screw)
•
Number 2 Robertson screwdriver or hex wrench (for fasteners that attach the module
to the frame)
Copyright © 2019, Juniper Networks, Inc. 96
TCX1000 Programmable ROADM Hardware Guide