Juniper TCX1000-RDM20, Hardware Manual

Page: 19 / 206

Figure 2: TCX1000-RDM20 FRU Panel
3— 1— Power supplies Fan modules
2—Grounding point
The cooling system in a TCX1000-RDM20 consists of two fan modules. These fan modules
can be hot-swapped—you do not need to power off the TCX1000-RDM20 or disrupt the
functioning of the TCX1000-RDM20 to replace a fan module. The TCX1000-RDM20 has
two 650-W power supplies, either AC or DC depending on your configuration. The power
supplies can be AC or DC. Only one power supply is required to power the device, while
the second power supply provides redundancy.
Related
Documentation
TCX1000-2D8CMD Description on page 105
•
•
TCX1000-RDM20 Cooling System Description on page 17
•
TCX1000-RDM20 AC Power Supply Description on page 21
•
TCX1000-RDM20 DC Power Supply Description on page 22
TCX1000-RDM20 Hardware Component Overview
Table 3 on page 5 describes the TCX1000-RDM20 hardware models.
Table 3: TCX1000-RDM20 Hardware Models
Description Model Number
This system includes the chassis, two fan modules, and two AC power supplies. TCX1000-RDM20-AC
This system includes the chassis, two fan modules, and two DC power supplies. TCX1000-RDM20-DC
NOTE: You can purchase an AC or DC model of the TCX1000-RDM20 that
allows you to use 8 of the 20 universal ports, see Table 3 on page 5 . You
can purchase additional licenses to enable 2, 4, or 12 additional universal
ports. See
Table 4 on page 5 .
Table 4 on page 5 describes the TCX1000-RDM20 software licenses.
Table 4: TCX1000-RDM20 Software Licenses
Description Model Number
License for 2 additional universal ports. TCX1000-RDM-2P-UP
5 Copyright © 2019, Juniper Networks, Inc.
Chapter 1: System Overview