Juniper TCX1000-RDM20, Hardware Manual

Page: 29 / 206

Related
Documentation
TCX1000-RDM20 Management Port LEDs on page 15
•
•
TCX1000-RDM20 Chassis and Port Status LEDs on page 12
TCX1000-RDM20 Management Port LEDs
The management port—labeled ETH CRAFT —on the TCX1000-RDM20 is located on the
management panel. DCN 0 and DCN 1 are Ethernet ports for local management.
The management port is an Ethernet port that supports an RJ-45 connector and has
separate LEDs for status and activity.
Figure 7 on page 15 shows the location of the LEDs.
Figure 7: Management Port LEDs on the TCX1000-RDM20
g009703
2 3 1
3— 1— LEDs for DCN 1 LEDS for ETH CRAFT
2—LEDs for DCN 0
Table 9 on page 15 describes the RJ-45 management port LEDs.
Table 9: TCX1000-RDM20 RJ-45 Management Port LEDs
Description State Color LED
No link is established, there is
a fault, or the link is down. Off Unlit Link (left of receptacle)
Link is up. On steadily Green
Link is down. Off Unlit Status (right of receptacle)
There is data activity. On steadily Yellow
Related
Documentation
•
TCX1000-RDM20 Management Panel on page 14
15 Copyright © 2019, Juniper Networks, Inc.
Chapter 2: TCX1000-RDM20 Components and Descriptions