manualshive.com logo in svg

Juniper T4000 -, Hardware Manual

The Juniper T4000 Hardware Manual is a comprehensive guide that provides detailed instructions and specifications for the Juniper T4000 product. Download this free manual from manualshive.com to discover valuable insights on how to set up, maintain, and maximize the performance of your Juniper T4000, ensuring a seamless user experience.

Share
Download
background image

In this example, the output shows that the rear fan tray has five blowers, indicating
that the RHTREARTRAY-T rear fan tray is installed. The last five lines of the output
for the fans each include

Blower

in the description.

user@host> 

show chassis environment

Fans  Top Left Front fan             OK         Spinning at normal speed
      Top Left Middle fan            OK         Spinning at normal speed
      Top Left Rear fan              OK         Spinning at normal speed
      Top Right Front fan            OK         Spinning at normal speed
      Top Right Middle fan           OK         Spinning at normal speed
      Top Right Rear fan             OK         Spinning at normal speed
      Bottom Left Front fan          OK         Spinning at normal speed
      Bottom Left Middle fan         OK         Spinning at normal speed
      Bottom Left Rear fan           OK         Spinning at normal speed
      Bottom Right Front fan         OK         Spinning at normal speed
      Bottom Right Middle fan        OK         Spinning at normal speed
      Bottom Right Rear fan          OK         Spinning at normal speed
      Fourth Blower from top         OK         Spinning at normal speed
      Bottom Blower                  OK         Spinning at normal speed
      Middle Blower                  OK         Spinning at normal speed
      Top Blower                     OK         Spinning at normal speed
      Second Blower from top         OK         Spinning at normal speed

In this example, the output shows that the rear fan tray has eight fans, indicating that
FAN-REAR-TX-T640-S rear fan tray is installed. The last eight lines of the output for
the fans each begin with

Rear Tray

and include

fan

in the description.

Fans  Top Left Front fan             OK         Spinning at normal speed 
      Top Left Middle fan            OK         Spinning at normal speed 
      Top Left Rear fan              OK         Spinning at normal speed 
      Top Right Front fan            OK         Spinning at normal speed 
      Top Right Middle fan           OK         Spinning at normal speed 
      Top Right Rear fan             OK         Spinning at normal speed 
      Bottom Left Front fan          OK         Spinning at normal speed 
      Bottom Left Middle fan         OK         Spinning at normal speed 
      Bottom Left Rear fan           OK         Spinning at normal speed 
      Bottom Right Front fan         OK         Spinning at normal speed 
      Bottom Right Middle fan        OK         Spinning at normal speed 
      Bottom Right Rear fan          OK         Spinning at normal speed 
      Rear Tray Top fan              OK         Spinning at normal speed 
      Rear Tray Second fan           OK         Spinning at normal speed 
      Rear Tray Third fan            OK         Spinning at normal speed 
      Rear Tray Fourth fan           OK         Spinning at normal speed 
      Rear Tray Fifth fan            OK         Spinning at normal speed 
      Rear Tray Sixth fan            OK         Spinning at normal speed 
      Rear Tray Seventh fan          OK         Spinning at normal speed 
      Rear Tray Bottom fan           OK         Spinning at normal speed 

2.

Issue the

show chassis hardware models

command.

In this example, the output shows that FAN-REAR-TX-T640 is installed.

user@host> 

show chassis hardware models

user@host> show chassis hardware models

Hardware inventory:
Item             Version  Part number                    FRU model number
Midplane         REV 04   710-002726                     CHAS-BP-T640-S
FPM Display      REV 02   710-002897                     CRAFT-T640-S
CIP              REV 05   710-002895                     CIP-L-T640-S
PEM 0            Rev 01   740-002595                     PWR-T-DC-S
SCG 0            REV 04   710-003423                     SCG-T-S

161

Copyright © 2013, Juniper Networks, Inc.

Chapter 15: Preparing to Upgrade to a T4000 Router

Summary of Contents for T4000 -













































































































































































































































































































































































































Reviews:

No comments

Related manuals for T4000 -

3Com Server User Manual preview
Server
Brand: 3Com Pages: 48
C&H Technologies EM405-8 Manual preview
EM405-8
Brand: C&H Technologies Pages: 46
Idis DR-4100P Series Installation Manual preview
DR-4100P Series
Brand: Idis Pages: 30
National Instruments NI 9265 Operating Instructions Manual preview
NI 9265
Brand: National Instruments Pages: 26
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Brand: National Instruments Pages: 85
National Instruments Module SCXI-1503 User Manual preview
Module SCXI-1503
Brand: National Instruments Pages: 79
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
Planet ADSL 2/2+ Router with USB Port ADE-3410v2 User Manual preview
ADSL 2/2+ Router with USB Port ADE-3410v2
Brand: Planet Pages: 62
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Abocom WM3111 Specification preview
WM3111
Brand: Abocom Pages: 1
Tandberg Data SUPERLOADER DLT MAGAZINE Quick Start Manual preview
SUPERLOADER DLT MAGAZINE
Brand: Tandberg Data Pages: 6
Caen A 1735 Technical Information Manual preview
A 1735
Brand: Caen Pages: 14
Lantech IMR-3003 User Manual preview
IMR-3003
Brand: Lantech Pages: 40
IBM EtherLink XL User Manual preview
EtherLink XL
Brand: IBM Pages: 72
Telestar DIGIBIT R1 Operating Manual preview
DIGIBIT R1
Brand: Telestar Pages: 16
Cabletron Systems TRXMIM-24A User Manual preview
TRXMIM-24A
Brand: Cabletron Systems Pages: 56
Atlantis Land I-FLY A02-WRA4-54G (Italian) Specifications preview
I-FLY A02-WRA4-54G
Brand: Atlantis Land Pages: 3

Brands by name

Popular brands

Load more brands