Juniper T4000 -, Hardware Manual

Page: 79 / 396

CHAPTER 4
T4000 Router Installation Summary
• Overview of Installing the T4000 Router on page 55
Overview of Installing the T4000 Router
You must proceed through the installation process in the following order:
1.
Review all safety guidelines and warnings for the router.
WARNING: To avoid harm to yourself or the router as you install and
maintain it, you must follow the safety procedures for working with Internet
routers, as well as the guidelines and warnings for working with and near
electrical equipment. However, providing an exhaustive set of guidelines
for working with electrical equipment is beyond the scope of this
documentation.
See “General Safety Guidelines for Juniper Networks Devices” on page 293 .
2.
Prepare the installation site for the router.
See “Overview of Preparing the Site for the T4000 Router” on page 57 .
3.
Unpack the router and verify the parts received.
See “Overview of Unpacking the T4000 Router” on page 61 .
4.
Install the mounting hardware. See:
• “Installing the T4000 Mounting Hardware for a Four-Post Rack or Cabinet” on
page 67
.
•
“Installing the T4000 Mounting Hardware for an Open-Frame Rack” on page 70 .
5.
Install the router into the rack. See:
• Overview of Installing the T4000 Router into a Rack on page 75
•
Overview of Installing a T4000 Router Using a Mechanical Lift on page 77
•
Overview of Installing a T4000 Router Without a Mechanical Lift on page 85
6.
Ground the router.
See “Connecting the T4000 Grounding Cable” on page 110 .
55 Copyright © 2013, Juniper Networks, Inc.