11
.1
4
E
N
46
3.3
Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline is dangerous and is strictly prohibited.
Always park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
Parking the truck securely
Procedure
• Set the drive wheel to “Straight ahead”.
• Turn off the key switch and remove the key.
• For CanCode (
o
) press the O key.
• Press the Emergency Disconnect.
The truck is parked.
3.4
Battery discharge monitor
Z
The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the battery charge falls below the residual capacity level, the travel speed is
reduced to half the setting. An alternating display (46) appears. The full travel speed
is only released again when the battery connected is at least 70% charged.
11
.1
4
E
N
46
3.3
Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline is dangerous and is strictly prohibited.
Always park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
Parking the truck securely
Procedure
• Set the drive wheel to “Straight ahead”.
• Turn off the key switch and remove the key.
• For CanCode (
o
) press the O key.
• Press the Emergency Disconnect.
The truck is parked.
3.4
Battery discharge monitor
Z
The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the battery charge falls below the residual capacity level, the travel speed is
reduced to half the setting. An alternating display (46) appears. The full travel speed
is only released again when the battery connected is at least 70% charged.
Summary of Contents for EZS 350 XL
