11
.1
4
E
N
68
Checking the settings in programming mode
Procedure
• Select the travel program to be worked on after changing the parameter value, and
confirm with the Set key (64).
The truck is now in travel mode and can be checked.
Z
To continue setting, confirm with the Set key (64) again.
Saving travel parameters
Requirements
– Enter all parameters.
Procedure
• Run "SaveParameters" by pressing 1-2-3-Set.
• Confirm with the O key (63).
7.4
ISM access module (
o
)
Z
If the truck is equipped with an ISM access module or Can Code refer to the “ISM
Access Module” operator manual.
11
.1
4
E
N
68
Checking the settings in programming mode
Procedure
• Select the travel program to be worked on after changing the parameter value, and
confirm with the Set key (64).
The truck is now in travel mode and can be checked.
Z
To continue setting, confirm with the Set key (64) again.
Saving travel parameters
Requirements
– Enter all parameters.
Procedure
• Run "SaveParameters" by pressing 1-2-3-Set.
• Confirm with the O key (63).
7.4
ISM access module (
o
)
Z
If the truck is equipped with an ISM access module or Can Code refer to the “ISM
Access Module” operator manual.
Summary of Contents for EZS 350 XL
