11
.1
4
E
N
62
7.2
CanCode keypad
CanCode keypad
The keypad consists of 10 digit keys, a Set key and a
o
key.
The O key indicates the follow operating statuses via a
red / green LED:
– Code lock function (starting up the truck).
– Adjusting the travel program depending on the setting
and truck.
– Setting and changing parameters.
7.2.1 Keypad
When the correct code is entered, the truck is ready for use. You can allocate an
individual code to each truck, operator or group of operators. When the truck is
supplied from the factory, the code is indicated on a sticker. Change the master and
operator codes when you use the truck for the first time.
Z
Set different codes for rider and pedestrian trucks.
Starting the truck
Procedure
• Switching on the Emergency
Disconnect.
LED (65) lights up red.
• Enter the code.
When you enter the correct operator
code the LED (65) turns green. If the
LED (65) flashes red this means the
wrong code has been entered. Try
again.
The truck is switched on
Z
The Set key (64) has no function in operating mode.
Switching the truck off
Procedure
• Press the O key.
The truck is switched off.
Z
The truck can switch off automatically after a set time. To do this the relevant code
lock parameters must be entered, (see "Parameter Settings" on page 63).
7.2.2 Parameters
The keypad enables parameters to be adjusted in programming mode.
1
2
3
4
5
6
7
8
9
0
Set
1
2
3
4
5
6
7
8
9
0
Set
64
60
61
62
63
65
11
.1
4
E
N
62
7.2
CanCode keypad
CanCode keypad
The keypad consists of 10 digit keys, a Set key and a
o
key.
The O key indicates the follow operating statuses via a
red / green LED:
– Code lock function (starting up the truck).
– Adjusting the travel program depending on the setting
and truck.
– Setting and changing parameters.
7.2.1 Keypad
When the correct code is entered, the truck is ready for use. You can allocate an
individual code to each truck, operator or group of operators. When the truck is
supplied from the factory, the code is indicated on a sticker. Change the master and
operator codes when you use the truck for the first time.
Z
Set different codes for rider and pedestrian trucks.
Starting the truck
Procedure
• Switching on the Emergency
Disconnect.
LED (65) lights up red.
• Enter the code.
When you enter the correct operator
code the LED (65) turns green. If the
LED (65) flashes red this means the
wrong code has been entered. Try
again.
The truck is switched on
Z
The Set key (64) has no function in operating mode.
Switching the truck off
Procedure
• Press the O key.
The truck is switched off.
Z
The truck can switch off automatically after a set time. To do this the relevant code
lock parameters must be entered, (see "Parameter Settings" on page 63).
7.2.2 Parameters
The keypad enables parameters to be adjusted in programming mode.
1
2
3
4
5
6
7
8
9
0
Set
1
2
3
4
5
6
7
8
9
0
Set
64
60
61
62
63
65
Summary of Contents for EZS 350 XL
