Jungheinrich EZS 350 XL, Operating Instructions Manual

Page: 103 / 125

11
.1
4
E
N
102
8 Safety tests to be performed at intervals and after unusual
incidents
Z
Perform a safety check in accordance with national regulations. Jungheinrich
recommends the truck be checked to FEM guideline 4.004. The Jungheinrich
safety department has trained personnel who are able to carry out inspections.
The truck must be inspected at least annually or after any unusual event by a qualified
inspector (be sure to comply with national regulations). The inspector shall assess the
condition of the truck from purely a safety viewpoint, without regard to operational or
economic circumstances. The inspector shall be sufficiently instructed and
experienced to be able to assess the condition of the truck and the effectiveness of
the safety mechanisms based on the technical regulations and principles governing
the inspection of forklift trucks.
A thorough test of the truck must be undertaken with regard to its technical condition
from a safety aspect. The truck must also be examined for damage caused by
possible improper use. A test report shall be provided. The test results must be kept
for at least the next 2 inspections.
The owner is responsible for ensuring that faults are rectified immediately.
Z
A test plate is attached to the truck as proof that it has passed the safety inspection.
This plate indicates the due date for the next inspection.
9 Final de-commissioning, disposal
Z
Final de-commissioning or disposal of the truck in must be performed in
accordance with the regulations of the country of use. In particular, regulations
governing the disposal of batteries, fuels and electronic and electrical systems
must be observed.
The truck must only be disassembled by trained personnel in accordance with the
procedures as specified by the manufacturer. Note the manufacturer’s safety
instructions as specified in the service documentation.
10 Human vibration measurement
Z
Vibrations that affect the driver during operation over the course of the day are
known as human vibrations. Excessive human vibrations will cause the driver long
term health problems. The European "2002/44/EC/Vibration" operator directive has
therefore been established to protect drivers.
To help operators to assess the application situation, the manufacturer offers a
service of measuring these human vibrations.
11
.1
4
E
N
102
8 Safety tests to be performed at intervals and after unusual
incidents
Z
Perform a safety check in accordance with national regulations. Jungheinrich
recommends the truck be checked to FEM guideline 4.004. The Jungheinrich
safety department has trained personnel who are able to carry out inspections.
The truck must be inspected at least annually or after any unusual event by a qualified
inspector (be sure to comply with national regulations). The inspector shall assess the
condition of the truck from purely a safety viewpoint, without regard to operational or
economic circumstances. The inspector shall be sufficiently instructed and
experienced to be able to assess the condition of the truck and the effectiveness of
the safety mechanisms based on the technical regulations and principles governing
the inspection of forklift trucks.
A thorough test of the truck must be undertaken with regard to its technical condition
from a safety aspect. The truck must also be examined for damage caused by
possible improper use. A test report shall be provided. The test results must be kept
for at least the next 2 inspections.
The owner is responsible for ensuring that faults are rectified immediately.
Z
A test plate is attached to the truck as proof that it has passed the safety inspection.
This plate indicates the due date for the next inspection.
9 Final de-commissioning, disposal
Z
Final de-commissioning or disposal of the truck in must be performed in
accordance with the regulations of the country of use. In particular, regulations
governing the disposal of batteries, fuels and electronic and electrical systems
must be observed.
The truck must only be disassembled by trained personnel in accordance with the
procedures as specified by the manufacturer. Note the manufacturer’s safety
instructions as specified in the service documentation.
10 Human vibration measurement
Z
Vibrations that affect the driver during operation over the course of the day are
known as human vibrations. Excessive human vibrations will cause the driver long
term health problems. The European "2002/44/EC/Vibration" operator directive has
therefore been established to protect drivers.
To help operators to assess the application situation, the manufacturer offers a
service of measuring these human vibrations.