Jungheinrich ETV 110 Operating Instructions Manual Download Page 78

Page: 78 / 157

. .

E 26

Collecting, Lifting and Transporting Loads

Solo Pilot

–

– Place

Place fork

fork prongs

prongs in

in the

the horizontal

horizontal

position: Set the Solo Pilot (3) lever

position: Set the Solo Pilot (3) lever
(27) to neutral.

(27) to neutral.

–

– Approach the load.

Approach the load.

–

– Extend

Extend the

the mast

mast support

support forward:

forward:

Push the Solo Pilot (3) lever (26).

–

– Raise

Raise the

the forks

forks to

to the

the correct

correct height:

height:

Pull the Solo Pilot lever (24).

–

– Insert the forks under the load

Insert the forks under the load

–

– Lift

Lift the

the load

load clear:

clear: Pull

Pull the

the Solo

Solo Pilot

Pilot

lever (24).

–

– To

To retract

retract the

the mast

mast support:

support: Pull

Pull the

the

Solo Pilot (3) lever (26).

The truck can only be moved with or

The truck can only be moved with or
without a load when the mast support is retracted, the mast tilted back and the load

without a load when the mast support is retracted, the mast tilted back and the load

handler lowered.

–

– To lower the load in the transport position: Push the Solo Pilot (3) lever (24).

To lower the load in the transport position: Push the Solo Pilot (3) lever (24).

–

– To position the load in the tilt back position: Pull the Solo Pilot (3) lever (27).

To position the load in the tilt back position: Pull the Solo Pilot (3) lever (27).

–

– Transport load.

Transport load.

–

– To place the load in a horizontal position: Push the Solo Pilot (3) lever (27).

To place the load in a horizontal position: Push the Solo Pilot (3) lever (27).

–

– To

To position

position the

the load

load at

at the

the correct

correct height:

height: Pull

Pull the

the Solo

Solo Pilot

Pilot lever

lever (24)

(24) and

and if

necessary push the Solo Pilot (3) lever (26) to extend the mast support.

–

– To lower the load: Push the Solo Pilot (3) lever (24).

To lower the load: Push the Solo Pilot (3) lever (24).

–

– To retract the mast support: Pull the Solo Pilot (3) lever (26).

To retract the mast support: Pull the Solo Pilot (3) lever (26).

Multi Pilot

–

– Place

Place fork

fork prongs

prongs in

in the

the horizontal

horizontal

position: Press rocker switch (28),

rocker (V) or (R).

–

– Approach the load.

Approach the load.

–

– Extend the

Extend the mast support

mast support forward: Set

forward: Set

Multi Pilot (3a) to direction (T).

–

– Raise

Raise the

the forks

forks to

to the

the correct

correct height:

height:

Pull Multi Pilot (3a) in direction

Pull Multi Pilot (3a) in direction (H).

(H).

–

– Insert the forks under the load

Insert the forks under the load

–

– Lift the

Lift the load clear:

load clear: Pull Multi

Pull Multi Pilot (3a)

Pilot (3a)

in direction (H)

4 2

6 2

https://www.besttruckmanuals.com/

Summary of Contents for ETV 110






























































































































































Search results

Summary of Contents for ETV 110

Reviews:

Jungheinrich ETV 110, Operating Instructions Manual, Page: 78 / 157

Search results

Summary of Contents for ETV 110

Reviews: