Jungheinrich ETV 110, Operating Instructions Manual

Page: 100 / 157

0 0
8 8
1 1
2 2
. .
G G
B B
E 48 E 48
6 6..3 3 P Pa arra am me ette er r S Se ettttiin ng gs s
To change the truck setting you must To change the truck setting you must enter the master code. enter the master code.
Z Z
The factory setting for the master code is 7-2-9-5. The factory setting for the master code is 7-2-9-5.
M M
When starting the truck for the first time change the master code. When starting the truck for the first time change the master code.
To enter the master code: To enter the master code:
– – Press the Press the
o o
key key
– – Enter master code Enter master code
Code Lock Parameters Code Lock Parameters
Truck setting procedure: Truck setting procedure:
– – Enter the three digit parameter number, confirm with the Set key (68). Enter the three digit parameter number, confirm with the Set key (68).
– – Enter the Enter the setting according setting according to the to the parameter list parameter list or change or change and confirm and confirm with the with the Set Set
key (68). key (68).
Z Z
If the entry is incorrect, the LED (67) of the If the entry is incorrect, the LED (67) of the
o o
key (72) flashes red. If you enter the key (72) flashes red. If you enter the
parameter number again the setting can parameter number again the setting can be entered or changed. be entered or changed.
To enter more parameters, repeat the proc To enter more parameters, repeat the procedure. To finish entering, press the edure. To finish entering, press the
o o
key (72). key (72).
https://www.besttruckmanuals.com/