Jungheinrich ETV 110, Operating Instructions Manual

Page: 67 / 157

E 15 E 15
0 0
8 8
1 1
2 2
. .
G G
B B
4 4 IIn nd du us sttrriia al l T Trru uc ck k O Op pe erra attiio on n
4. 4.1 1 Sa Safe fety ty re regu gula lati tion ons f s for or tr truc uck o k ope pera rati tion on
Travel routes and work areas: Travel routes and work areas: Only use lanes and routes specifically designated for Only use lanes and routes specifically designated for
truck traffic. Unauthorised third parties must stay away from work areas. Loads must truck traffic. Unauthorised third parties must stay away from work areas. Loads must
only be stored in places specially designated for this purpose. Loads must not be
only be stored in places specially designated for this purpose. Loads must not be
deposited on travel or escape routes, in front of safety mechanisms or operating deposited on travel or escape routes, in front of safety mechanisms or operating
equipment that must be accessible at all times. equipment that must be accessible at all times.
The truck must only be operated in work areas The truck must only be operated in work areas with sufficient lighting to avoid danger with sufficient lighting to avoid danger
to personnel and materials. to personnel and materials.
Driving conduct: Driving conduct: The driver must adapt the travel speed to local conditions. The driver must adapt the travel speed to local conditions.
The The truck must be driven truck must be driven at slow speed when negotiating at slow speed when negotiating bends or narrow bends or narrow
passageways, when passing through swing doors and at blind spots. The driver must passageways, when passing through swing doors and at blind spots. The driver must
always observe an adequate braking distance between the forklift truck and the
always observe an adequate braking distance between the forklift truck and the
vehicle in front and must be in control of the truck at all times. Abrupt stopping (except
vehicle in front and must be in control of the truck at all times. Abrupt stopping (except
in emergencies), rapid U turns and overtaking at dangerous or blind spots are not
in emergencies), rapid U turns and overtaking at dangerous or blind spots are not
permitted. Do not lean
permitted. Do not lean out or reach beyond the out or reach beyond the working and operating area. working and operating area. Do Do not not
use a mobile phone or walkie-talkie without a handsfree device while operating use a mobile phone or walkie-talkie without a handsfree device while operating
th the e tr truck uck..
Travel visibility: Travel visibility: The driver must look in the direction of travel and must always have The driver must look in the direction of travel and must always have
a clear view of the route ahead. Loads that affect visibility must be positioned at the a clear view of the route ahead. Loads that affect visibility must be positioned at the
rear of the truck. If this is not possible, a second person
rear of the truck. If this is not possible, a second person must walk in front of the truck must walk in front of the truck
as a lookout. as a lookout.
Negotiating slopes and inclines: Negotiating slopes and inclines: Negotiating slopes or inclines is only permitted if Negotiating slopes or inclines is only permitted if
such roads are clean and have a non-slip surface and providing such journeys are such roads are clean and have a non-slip surface and providing such journeys are
safely undertaken in accordance with the technical specifications for the truck in
safely undertaken in accordance with the technical specifications for the truck in
question. The truck must always be driven with the load unit facing uphill. The
question. The truck must always be driven with the load unit facing uphill. The
industrial truck must not be turned, operated at an angle or parked on inclines or
industrial truck must not be turned, operated at an angle or parked on inclines or
slopes. Inclines must only be negotiated
slopes. Inclines must only be negotiated at slow speed, with the driver ready at slow speed, with the driver ready to brake to brake
at any moment. at any moment.
Negotiating lifts and docks: Negotiating lifts and docks: Lifts and docks must only be used if Lifts and docks must only be used if they have sufficient they have sufficient
capacity, are suitable for driving on and authorised for truck traffic by the owner. capacity, are suitable for driving on and authorised for truck traffic by the owner.
The
The driver must satisfy himself driver must satisfy himself of the above before of the above before entering these areas. The entering these areas. The truck truck
can only be moved with or without a load when the mast can only be moved with or without a load when the mast support is retracted, the mast support is retracted, the mast
tilted back and the load handler lowered. The truck must enter lifts with the load in tilted back and the load handler lowered. The truck must enter lifts with the load in
front and must take up a position which does not
front and must take up a position which does not allow it to come into contact with the allow it to come into contact with the
walls of the lift shaft. walls of the lift shaft.
Persons riding in the lift with the forklift truck must only enter the lift after the truck has
Persons riding in the lift with the forklift truck must only enter the lift after the truck has
come to a rest and must leave the lift before the truck.
come to a rest and must leave the lift before the truck.
Work platforms: Work platforms: The use of work platforms is governed by national law: In some The use of work platforms is governed by national law: In some
member states the use of work platforms is prohibited on industrial trucks Observe member states the use of work platforms is prohibited on industrial trucks Observe
https://www.besttruckmanuals.com/