Jungheinrich ETV 110, Operating Instructions Manual

Page: 118 / 157

0 0
2 2
1 1
0 0
. .
G G
B B
F 2 F 2
– – Do not clean the electrical system with water. Do not clean the electrical system with water.
– – Clean Clean the the electrical system electrical system with weak with weak suction suction or compressed or compressed air (use air (use a compr a compressor essor
with a water trap) and not a conductive, anti-static brush. with a water trap) and not a conductive, anti-static brush.
Risk of component damage when cleaning the truck Risk of component damage when cleaning the truck
If the truck is to be cleaned with a water jet or a high-pressure cleaner, all electrical If the truck is to be cleaned with a water jet or a high-pressure cleaner, all electrical
and electronic components must be carefully covered beforehand as moisture can
and electronic components must be carefully covered beforehand as moisture can
cause malfunctions. Do not clean with pressurised
cause malfunctions. Do not clean with pressurised water. water.
After cleaning After cleaning the truck, the truck, carry out carry out the operations the operations detailed in detailed in the “Recommissioning” the “Recommissioning”
section. section.
Electrical system Electrical system
M M
Accident risk Accident risk
– – Only suitably trained electricians may operate on the truck's electrical system. Only suitably trained electricians may operate on the truck's electrical system.
– – Before working on Before working on the electrical system, the electrical system, take all precautionary take all precautionary measures to avoid measures to avoid
electric shocks. electric shocks.
– – Always disconnect the battery before starting cleaning operations. Always disconnect the battery before starting cleaning operations.
M M
Electric currents can cause accidents Electric currents can cause accidents
Make sure the electrical system is Make sure the electrical system is voltage-free before starting work on it. voltage-free before starting work on it.
Before starting maintenance on the electrical system: Before starting maintenance on the electrical system:
– – Park the truck securely (see “Parking the Truck Securely” in Chapter E). Park the truck securely (see “Parking the Truck Securely” in Chapter E).
– – Press the Emergency Disconnect. Press the Emergency Disconnect.
– – Disconnect the battery. Disconnect the battery.
– – Remove any Remove any rings or rings or metal bracelets metal bracelets etc. before etc. before working on working on electrical components. electrical components.
Consumables and used parts Consumables and used parts
Consumables and use parts must be disposed of in accordance with the applicable Consumables and use parts must be disposed of in accordance with the applicable
environmental protection regulations. To change the oil contact the manufacturer's
environmental protection regulations. To change the oil contact the manufacturer's
customer service department, who have been specially trained for this task.
customer service department, who have been specially trained for this task.
– – Note the safety regulations when handling these materials. Note the safety regulations when handling these materials.
Welding Welding
To avoid damaging electric or electronic components, remove these from the truck To avoid damaging electric or electronic components, remove these from the truck
before performing welding operations.
before performing welding operations.
Settings Settings
When repairing or replacing hydraulic, electric or electronic components or assem- When repairing or replacing hydraulic, electric or electronic components or assem-
blies, always note the truck-specific settings. blies, always note the truck-specific settings.
https://www.besttruckmanuals.com/