Jungheinrich ETV 110 Page 61 Operating Instructions Manual Download

Page: 61 / 157

E 9

. .

Seat heating:

Apply the switch (6):

= seat heating ON;

= seat heating OFF

Lumbar vertebrae support:

Hand wheel (7) in position

= no bending in lumbar vertebrae area.

Turn hand wheel (7) to position

= Increased bending in upper lumbar vertebrae area.

Turn hand wheel (7) to position

= Increased bending in lower lumbar vertebrae area.

3.2.

2.1

1 Us

Usin

ing

g th

the

e se

seat

at be

belt

–

– Put on

Put on the

the seat belt

seat belt each

each time before

time before

starting the industrial truck.

–

– Change

Change the

the belt

belt height

height setting

setting (22)

(22)

according to your body size.

–

– Do not alter the belt setting.

Do not alter the belt setting.

–

– Frozen belt locks

Frozen belt locks (20) or pulleys must

(20) or pulleys must

be thawed out and dried.

–

– The

The warm

warm air

air temperature

temperature must

must not

not

60 °C.

–

– The seat

The seat belt and

belt and seat cover

seat cover must be

must be

checked for damage after an accident

checked for damage after an accident
and replaced if necessary.

and replaced if necessary.

–

– Damaged or

Damaged or non-functional belts

non-functional belts to be

to be

replaced only by contracted dealers or

replaced only by contracted dealers or
branches.

branches.

–

– Only

Only original

original spare

spare parts

parts to

to be

be used

used for

for

retrofits or repairs.

https://www.besttruckmanuals.com/

Summary of Contents for ETV 110






























































































































































Search results

Summary of Contents for ETV 110

Reviews:

Related manuals for ETV 110

Brands by name

Popular brands

Jungheinrich ETV 110, Operating Instructions Manual

Search results

Summary of Contents for ETV 110

Reviews:

Related manuals for ETV 110

Brands by name

Popular brands