Jungheinrich ETV 110 Operating Instructions Manual Download Page 66

Page: 66 / 157

. .

E 14

3.5

Test

stin

ing

g af

afte

ter

r da

dail

ily

y op

oper

erat

atio

ion

–

– Make sure the driver’s seat is locked in position.

Make sure the driver’s seat is locked in position.

–

– Test the seat belt. (The belt should block if extracted suddenly.)

Test the seat belt. (The belt should block if extracted suddenly.)

–

– Test the horn.

Test the horn.

–

– Test the controls and displays.

Test the controls and displays.

–

– Test the steering.

Test the steering.

–

– Check the steer

Check the steer angle display; turn

angle display; turn the steering

the steering wheel in

wheel in both directions

both directions as far as

as far as

the stop and check that the

the stop and check that the wheel position is displayed on the

wheel position is displayed on the control panel.

control panel.

–

– Test the lift/lower, tilt and if applicable the attachment hydraulic control functions.

Test the lift/lower, tilt and if applicable the attachment hydraulic control functions.

https://www.besttruckmanuals.com/

Summary of Contents for ETV 110






























































































































































Search results

Summary of Contents for ETV 110

Reviews:

Jungheinrich ETV 110, Operating Instructions Manual, Page: 66 / 157

Search results

Summary of Contents for ETV 110

Reviews: