Jungheinrich ETV 110, Operating Instructions Manual

Page: 104 / 157

0 0
8 8
1 1
2 2
. .
G G
B B
E 52 E 52
g g
M M
Changes to the service mode may only be made by the manufacturer’s service Changes to the service mode may only be made by the manufacturer’s service
department.
department.
9 9 T Trro ou ub blle es sh ho oo ottiin ng g
All faults All faults or results or results of of operating sequence operating sequence errors are errors are shown shown on the on the driver’s display. driver’s display.
Follow the instructions shown on the display. Follow the instructions shown on the display.
It may be necessary to start up the truck again. Turn the EMERGENCY It may be necessary to start up the truck again. Turn the EMERGENCY
DISCONNECT switch off and on again. DISCONNECT switch off and on again.
If the truck does not start consider the following: If the truck does not start consider the following:
Z Z If, after having carried out the instructions on the driver’s display and “Action” If, after having carried out the instructions on the driver’s display and “Action”
remedies, the fault persists, inform the manufacturer’s service department as the fault remedies, the fault persists, inform the manufacturer’s service department as the fault
can only be corrected by trained
can only be corrected by trained and qualified service engineers. and qualified service engineers.
10 10 M Mov ovin ing t g the he tr truc uck w k wit itho hout ut a b a bat atte tery ry, r , rec ecov over ery y
F F
This operation must only be performed by a suitably trained maintenance engineer. This operation must only be performed by a suitably trained maintenance engineer.
When the brakes are de-activated the truck must
When the brakes are de-activated the truck must be parked on a level surface, since be parked on a level surface, since
the brakes are no longer effective. the brakes are no longer effective.
Preparing the truck for recovery Preparing the truck for recovery
– – Turn Turn the the Emergency Emergency Disconnect Disconnect
switch and key switch off. switch and key switch off.
– – Prevent the truck from rolling away. Prevent the truck from rolling away.
– – Push the driver’s seat out of the guide Push the driver’s seat out of the guide
towards the steering wheel.
towards the steering wheel.
– – Disconnect the plug connection. Disconnect the plug connection.
– – Remove Remove the the seat seat panel panel (the (the seat seat
panel can be removed once the panel can be removed once the
3
3 mounti mounting scr ng screws hav ews have been e been
F Fa au ulltt P Prro ob ba ab blle e C Ca au us se e A Ac cttiio on n
Truck cannot Truck cannot
be switched
be switched
on
on
Battery not connected / Battery not connected /
battery cable severed
battery cable severed
Check battery connector, insert if Check battery connector, insert if
necessary / check cable
necessary / check cable
EMERGENCY EMERGENCY
DISCONNECT switch
DISCONNECT switch
pressed.
pressed.
Unlock the EMERGENCY Unlock the EMERGENCY
DISCONNECT switch.
DISCONNECT switch.
K Ke ey y s sw wiittc ch h s se et t tto o ""0 0"" S Se et t k ke ey y s sw wiittc ch h tto o ““II””..
Faulty Faulty fuse. fuse. Check Check fuses. fuses.
https://www.besttruckmanuals.com/