Jungheinrich EFG-Vac 22, Operating Instructions Manual, Page: 77 / 81

508
2973
- 501
1633
3 GB
F 12
6.11 Restrain safety belt service
The driver must check condition and correct operation of the safety restraint belt on
daily basis before using the industrial truck. Early detection of malfunctions is only
possible through regular checks.
– Pull out belt completely and check for unravelling.
– Check the function of the belt buckle for correct retraction of the belt into the
retractor
– Check cover for damage
Testing the automatic blocking retractor:
– Park the industrial truck on a horizontal surface
– Pull out the belt with a jerk
m
The automatic blocking system must lock the belt in the retractor.
– Open motor hood approximately 30 degrees
m
The automatic blocking system must lock the belt in the retractor
f
Do not operate the industrial truck when the safety restraint belt is defective; have the
belt exchanged immediately!
508
2973
- 501
1633
3 GB
F 12
6.11 Restrain safety belt service
The driver must check condition and correct operation of the safety restraint belt on
daily basis before using the industrial truck. Early detection of malfunctions is only
possible through regular checks.
– Pull out belt completely and check for unravelling.
– Check the function of the belt buckle for correct retraction of the belt into the
retractor
– Check cover for damage
Testing the automatic blocking retractor:
– Park the industrial truck on a horizontal surface
– Pull out the belt with a jerk
m
The automatic blocking system must lock the belt in the retractor.
– Open motor hood approximately 30 degrees
m
The automatic blocking system must lock the belt in the retractor
f
Do not operate the industrial truck when the safety restraint belt is defective; have the
belt exchanged immediately!