Jungheinrich EFG-Vac 22, Operating Instructions Manual, Page: 76 / 81

F 11
508
2973
- 501
1633
3 GB
6.9 Changing the vacuum filter
The vacuum filter (10) for the steering
system is located in the hydraulic tank.
Remove hydraulic tank cover and screw
off vacuum filter.
6.10 Check oil level for brake system
m
The brake fluid tank can be seen from the right side when the steering column is tilted
back.
To refill or change the mineral oil the cover (8) must be removed.
m
Do not use conventional brake fluid, refill only with prescribed mineral oil!
– Park and lock the truck (refer to
chapter E).
– Remove cover (8) after loosening the
screws.
– Visually check the oil level at the
expansion tank (9) and refill
transmission oil, if required (refer to
section 5.1).
A
The oil level must be visible between
markings “Min” and “Max”.
m
Used consumption-type materials must
be disposed of in accordance with the
applicable environmental protection
regulations.
10
9
8
F 11
508
2973
- 501
1633
3 GB
6.9 Changing the vacuum filter
The vacuum filter (10) for the steering
system is located in the hydraulic tank.
Remove hydraulic tank cover and screw
off vacuum filter.
6.10 Check oil level for brake system
m
The brake fluid tank can be seen from the right side when the steering column is tilted
back.
To refill or change the mineral oil the cover (8) must be removed.
m
Do not use conventional brake fluid, refill only with prescribed mineral oil!
– Park and lock the truck (refer to
chapter E).
– Remove cover (8) after loosening the
screws.
– Visually check the oil level at the
expansion tank (9) and refill
transmission oil, if required (refer to
section 5.1).
A
The oil level must be visible between
markings “Min” and “Max”.
m
Used consumption-type materials must
be disposed of in accordance with the
applicable environmental protection
regulations.
10
9
8