Jungheinrich EFG-Vac 22, Operating Instructions Manual, Page: 52 / 81

E 17
508
2973
- 501
1633
3 GB
Forward travel (single-pedal)
f
Make sure that the travel area is free
– Release the parking brake (3)
– Push travel direction switch (44) at the
MULTIPILOT or SOLOPILOT (14)
forward
– Slowly actuate accelerator pedal (6)
Forward travel (dual-pedal)
f
Make sure that the travel area is free
– Release the parking brake (3)
– Slowly actuate right driving pedal (13).
f
Do not move the MULTIPILOT for
travelling.
Changing the travelling direction
(single-pedal)
f
Before starting to travel into the opposite
direction make sure that the rear
travelling area is free.
– Release foot from actuated driving
pedal (6).
– Decelerate the truck to standstill by
means of brake pedal (7).
– Push travel direction switch (44) or (14) backward.
– Slowly actuate the accelerator pedal until the desired travelling speed has been
reached.
Changing the travelling direction (dual-pedal)
f
Before starting to travel into the opposite direction make sure that the rear travelling
area is free.
– Release foot from actuated driving
pedal (13).
– Decelerate the truck to standstill by
means of brake pedal (12).
– Slowly actuate accelerator pedal (11)
until the desired travelling speed has
been reached.
V R
44
7
6
3
E 17
508
2973
- 501
1633
3 GB
Forward travel (single-pedal)
f
Make sure that the travel area is free
– Release the parking brake (3)
– Push travel direction switch (44) at the
MULTIPILOT or SOLOPILOT (14)
forward
– Slowly actuate accelerator pedal (6)
Forward travel (dual-pedal)
f
Make sure that the travel area is free
– Release the parking brake (3)
– Slowly actuate right driving pedal (13).
f
Do not move the MULTIPILOT for
travelling.
Changing the travelling direction
(single-pedal)
f
Before starting to travel into the opposite
direction make sure that the rear
travelling area is free.
– Release foot from actuated driving
pedal (6).
– Decelerate the truck to standstill by
means of brake pedal (7).
– Push travel direction switch (44) or (14) backward.
– Slowly actuate the accelerator pedal until the desired travelling speed has been
reached.
Changing the travelling direction (dual-pedal)
f
Before starting to travel into the opposite direction make sure that the rear travelling
area is free.
– Release foot from actuated driving
pedal (13).
– Decelerate the truck to standstill by
means of brake pedal (12).
– Slowly actuate accelerator pedal (11)
until the desired travelling speed has
been reached.
V R
44
7
6
3