Jungheinrich EFG-Vac 22, Operating Instructions Manual, Page: 74 / 81

F 9
508
2973
- 501
1633
3 GB
6.4 Check hydraulic oil level
m
The load lifting device must be completely lowered.
– Prepare truck for the servicing and
maintenance operations
(refer to section 6.1).
– Unscrew air filter with dipstick (2).
– Visually check hydraulic oil level at
dipstick (3).
A
If the tank is sufficiently filled the
hydraulic level must be readable at the
upper marking (4).
– If required, refill hydraulic oil up to the required level (10 mm at dipstick (3)
correspond to approximately 1 l hydraulic oil).
m
Do not overfill hydraulic tank above the upper marking, as this may result in
malfunctions and damages of the system.
Used consumption-type materials must be disposed of in accordance with the
applicable environmental protection regulations.
2
f09unten
3
4
max.
min.
F 9
508
2973
- 501
1633
3 GB
6.4 Check hydraulic oil level
m
The load lifting device must be completely lowered.
– Prepare truck for the servicing and
maintenance operations
(refer to section 6.1).
– Unscrew air filter with dipstick (2).
– Visually check hydraulic oil level at
dipstick (3).
A
If the tank is sufficiently filled the
hydraulic level must be readable at the
upper marking (4).
– If required, refill hydraulic oil up to the required level (10 mm at dipstick (3)
correspond to approximately 1 l hydraulic oil).
m
Do not overfill hydraulic tank above the upper marking, as this may result in
malfunctions and damages of the system.
Used consumption-type materials must be disposed of in accordance with the
applicable environmental protection regulations.
2
f09unten
3
4
max.
min.