Jungheinrich EFG-Vac 22, Operating Instructions Manual

Page: 72 / 81

F 7
508
2973
- 501
1633
3 GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
f
Improper handling is injurious to health, life, and environment. Consumption type
materials must be stored in adequate containers. They might be inflammable and,
therefore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if
mixing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
Grease data
1)
valid for temperature -5/+30 °C
2)
valid for temperature -20/-5 °C
3)
valid for tempe30/+50 °C
Code Order-no. Quantity Designation Used for
A
50062046
34.5 l
Renolin 32
1)
Hydraulic system 50062045 Renolin 22
2)
50124051 HV 68
3)
D 50124052 0.25 l
Hydraulic oil
ATF Dexron II-D
Hydraulic brake system
E 50055726
Lubricating grease
KP 2 K
3)
Front and rear wheel -
wheel bearing
G 29201280 Chain spray Chains
N 50124053 2x approx. 3 l
Transmission oil STOU
Universal
Transmission
Code Saponification Drop point
°
C
Worked
penetraton at
25
°
C
NLG1 class Usage
temperature
°
C
E Lithium 185 265-295 2 -35/+120
F 7
508
2973
- 501
1633
3 GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
f
Improper handling is injurious to health, life, and environment. Consumption type
materials must be stored in adequate containers. They might be inflammable and,
therefore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if
mixing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
Grease data
1)
valid for temperature -5/+30 °C
2)
valid for temperature -20/-5 °C
3)
valid for tempe30/+50 °C
Code Order-no. Quantity Designation Used for
A
50062046
34.5 l
Renolin 32
1)
Hydraulic system 50062045 Renolin 22
2)
50124051 HV 68
3)
D 50124052 0.25 l
Hydraulic oil
ATF Dexron II-D
Hydraulic brake system
E 50055726
Lubricating grease
KP 2 K
3)
Front and rear wheel -
wheel bearing
G 29201280 Chain spray Chains
N 50124053 2x approx. 3 l
Transmission oil STOU
Universal
Transmission
Code Saponification Drop point
°
C
Worked
penetraton at
25
°
C
NLG1 class Usage
temperature
°
C
E Lithium 185 265-295 2 -35/+120