manualshive.com logo in svg

Jungheinrich EFG-Vac 22, Operating Instructions Manual, Page: 32 / 81

Share
Download
Jungheinrich EFG-Vac 22 Operating Instructions Manual Download Page 32

D 5

508

2973

 - 501

1633

3 GB

5

Charging the battery

– Expose the battery (refer to chapter D, section 3).

f

Connecting and disconnecting battery and charger is only permitted with the charger
switched off.
The surface of the battery cells must be uncovered during charging operation, to
guarantee sufficient aeration. Do not put any metal objects on the battery. 

m

Check all cable and plug connections for visible damages prior to charging.

– Connect charging cable of the battery

charging station to battery plug (5).

– Charge the battery according to the

instructions of the battery and charger
manufacturer.

f

All safety instructions as provided by the battery supplier and battery charger supplier
must be strictly observed. During charging, the battery cover must remain open at all
times, so that any gas generated by the charging process can volatilise. No not use
any open fire or light. Explosion hazard!

D 5

508

2973

 - 501

1633

3 GB

5

Charging the battery

– Expose the battery (refer to chapter D, section 3).

f

Connecting and disconnecting battery and charger is only permitted with the charger
switched off.
The surface of the battery cells must be uncovered during charging operation, to
guarantee sufficient aeration. Do not put any metal objects on the battery. 

m

Check all cable and plug connections for visible damages prior to charging.

– Connect charging cable of the battery

charging station to battery plug (5).

– Charge the battery according to the

instructions of the battery and charger
manufacturer.

f

All safety instructions as provided by the battery supplier and battery charger supplier
must be strictly observed. During charging, the battery cover must remain open at all
times, so that any gas generated by the charging process can volatilise. No not use
any open fire or light. Explosion hazard!

Summary of Contents for EFG-Vac 22


















































































Reviews:

No comments