2.2 Recalling scene
Scenes help you to save individual settings of one or more persons and to recall them with a
single press of a button.
o
Briefly press the corresponding scene button
Ƈ
to
ƌ
.
The luminaires that belong to that scene will switch to the stored values.
2.3 Saving scene
i
If the scene is to be recalled from several transmitters, it must be stored separately at each
transmitter.
o
Luminaires that are not part of the scene must be switched off prior to saving.
o
To set the luminaires to the desired values, see chapter 3.
o
Press the corresponding scene button
Ƈ
to
ƌ
longer than 4 seconds.
LED lights up green for 3 seconds. The scene is saved on the selected button.
3/15
ZigBee radio hand-held transmitter
82595215
J0082595215
28.06.2017
