o
Keep the
Ƈ
and
ƈ
buttons pressed until the LED flashes green.
The luminaire flashes. Resetting in process.
LED lights up green; luminaire lights up. Resetting successful.
LED flashes red quickly for 3 seconds. Participant could not be reset.
4.6 Deleting connections from the transmitter to the luminaires
i
The transmitter can store a maximum of 10 connections to luminaires. If the memory is full,
a connection needs to be deleted first in order to save a new connection.
o
Press
Ɔ
and
ƍ
buttons simultaneously.
LED lights up red. All connections to luminaires are selected.
o
Press the
Ɔ
and
ƍ
buttons briefly and simultaneously until the connection to be
deleted is selected.
The corresponding luminaire flashes.
i
If the corresponding luminaire is defective or no longer exists, press the
Ɔ
and
ƍ
buttons simultaneously until no luminaire flashes after pressing. The transmitter indicates
this by a red-flashing LED.
o
Press the
Ƈ
and
ƈ
buttons simultaneously for longer than 4 seconds.
LED lights up green for 3 seconds. The connection has been deleted from the transmitter.
9/15
ZigBee radio hand-held transmitter
82595215
J0082595215
28.06.2017
