i
After 10 seconds, if no connection process is started, the transmitter will search for an
open network in order to join it.
LED lights up green for 3 seconds. Transmitter has been added to a network.
LED flashes red quickly for 10 seconds. Transmitter has not been added to a network.
4.4 Cloning the transmitter
All connections of a transmitter are transferred to another transmitter. This function can only be
used with our company's transmitters.
o
To add a new transmitter to the existing network, see Chapter 4.3.
Prerequisite:
At least one luminaire must be switched on.
o
Press
Ƌ
and
ƍ
buttons on the new transmitter simultaneously until the LED flashes
green.
The new transmitter is in programming mode.
o
Within 10 seconds, start a connection process on the transmitter to be cloned, see
Chapter 4.2.
LED lights up green for 3 seconds. The new transmitter has accepted the connections.
LED flashes red quickly for 10 seconds. The new transmitter has not accepted any connec-
tions.
4.5 Resetting a luminaire
All connections of the luminaire will be disconnected and the assignment to a network deleted.
i
If several luminaires are mounted near each other, it might be necessary to switch off those
luminaires that are not to be reset.
8/15
ZigBee radio hand-held transmitter
82595215
J0082595215
28.06.2017
