3 3 Setting luminaires individually
3.1 Selecting a luminaire
o
Briefly press the
Ɔ
and
ƍ
buttons simultaneously.
LED lights up red.
All luminaires that are connected to the transmitter are selected. The luminaires acknowl-
edge this e.g. by short flashing.
i
If only a single luminaire is to be set, press the
Ɔ
and
ƍ
buttons simultaneously
until the respective luminaire is selected. When the last luminaire connected to the trans-
mitter has been selected, all luminaires connected to the transmitter will be selected the
next time the buttons
Ɔ
and
ƍ
are pressed.
o
Switch on the luminaire by briefly pressing the
ƍ
button.
o
Set the luminaire. The available settings depend on the luminaire used.
Luminaire selection
Ǝ
Ɔ
and
ƍ
Switching and brightness
Ǝ
Ɔ
or
ƍ
light color
Ə
Ƈ
or
ƈ
Color saturation
Ɛ
Ɖ
or
Ɗ
Color temperature
Ƒ
Ƌ
or
ƌ
o
Wait for approx. 6 seconds until the transmitter switches back to the basic functions.
o
As an option, save the settings as a scene, see Chapter 2.3.
3.2 Switching or dimming luminaires individually
o
Selecting a luminaire, see Chapter 3.1.
4/15
ZigBee radio hand-held transmitter
82595215
J0082595215
28.06.2017
