5.3 Accepting connections from another transmitter
o
Switch on the service functions, see Chapter 5.1.
o
On the receiving transmitter, press the
ƍ
and
Ƌ
buttons simultaneously until the
LED flashes green.
o
Start a connection process on the transmitter to be read, see Chapter 4.2.
LED lights up green for 3 seconds. The connections from the transmitter to be read have
been saved to the buffer memory.
LED flashes red quickly for 3 seconds. The connections from the transmitter to be read
have not been saved to the buffer memory.
o
Optionally press the
Ɔ
button briefly to show all luminaires present in the buffer memo-
ry.
The luminaires saved in the buffer memory light up briefly.
o
Within 2 minutes after the last button has been pressed, transfer the buffer memory to the
desired transmitter, see Chapter 5.5.
5.4 Copy the connections that are saved in the transmitter into the buffer memory.
o
Switch on the service functions, see Chapter 5.1.
o
Press the
Ƈ
button for longer than 4 seconds.
LED lights up green for 3 seconds. The transmitter's connections have been saved to the
buffer memory.
o
Optionally press the
Ɔ
button briefly to show all luminaires present in the buffer memo-
ry.
The luminaires saved in the buffer memory light up briefly.
12/15
ZigBee radio hand-held transmitter
82595215
J0082595215
28.06.2017
