HT30-M1
19
5. Preparations
5.1. Setup
High temperature circulator HT30 as well as
High temperature circulator HT30 with C.U.
cooling unit:
as a desktop unit
Place the circulator on an even surface on a pad
made of
non-flammable
material.
as a stand-mounted unit
Place the unit in an vertical position.
A wall distance of at least 15 cm must be
maintained for ventilation, allowing internal heat to
be conducted away from the unit.
JULABO Order-No.
9790100
C.U. cooling
unit
M1 remote control electronics:
The unit should be set up at a dry location.
Place the unit in an upright position and do not
obstruct the ventilation Ambient temperatures
above 40 °C result in a failure of the unit.
Do not set up the unit in the immediate vicinity of
heat sources and do not expose to sun light.