– 42 –
Classifi
-
cation of
parameters
No.
Parameter name
Range
Standard
value
Meaning of parameter and comment
Energi-
zation
setting
P73
Presser foot is lifted at the
time of turning the power
ON
Yes/No
No
Presser foot goes up when turning the
power ON
Other
settings
P74
Whether or not the air pres-
sure detection is required
Yes/No
Yes
In the case of "Yes", the sewing ma-
chine stops and generates the alarm if
the detected air pressure is low during
work
P75
Whether or not the repeti-
tive operation is required
Yes/No
Yes
"Yes" means that cyclic machining of
the same file is started after turning the
power ON
P76
Repetitive machining time
(min)
1 to 65535
1440
Cyclic machining total time: When the
set time has elapsed, cyclic machining
is stopped
P77
Repetitive machining inter
-
val (s)
0 to 20
0
Interval from the completion of machin-
ing to re-starting of machining under
the cyclic machining mode
P78
Work ending position
Return to 0
(zero) / sewing
starting position
/ default
Return to
0 (zero)
Return to 0 (zero): All of x / y axes
coordinates return to 0 (zero); sewing
machine terminates sewing; reset point
Right side: Rightmost position within
the machining range
Sewing starting position: First sewing
point of the machining file
Default: The sewing machine stops
after the completion of machining
P395
Template recognition meth-
od
Barcode / elec-
tronic tag
Electronic
tag
By serial number of file: Barcode identi
-
fication mode
By file name: Electronic tag identifica
-
tion mode
P81
Interface style
Classic / simple Classic
Classic: Button style of the virtual body
Simple: Flat button style
P681
Motion mode is started
before operation
XY simul-
taneous / X
precedence / Y
precedence
XY simul-
taneous
P755
Jump mode during opera-
tion
X precedence /
Y precedence /
XY simultane-
ous
XY simul-
taneous
Jump travel mode
P241
Connection to the extend
-
ed screen
Yes/No
No
In the case of "Yes", information on the
operation file can be displayed on the
external add-on display
P79
Reverse feed after main
shaft needle stops
0 to 160
50
P242
Voice prompt
High / medium /
low / OFF
OFF
"High", "medium" and "low" respective-
ly refer to the magnitude of sound
P21
Enabling the memory func-
tion during power failure
Enable / disable Enable
After re-energization of the sewing
machine, the sewing sequence carried
out before power failure is resumed to
continue sewing from that interrupted
sequence.
P194
File is enabled when the
electronic tag separates
from it
Enable / disable Disable
