JUKI PS-800-6045, Instruction Manual

Page: 41 / 65

– 39 –
Classifi
-
cation of
parameters
No. Parameter name
Range
Standard
value
Meaning of parameter and comment
Speed
parameter P18 Button sewing speed 2
after the button is pressed
(mm/min) 100 to 20000 8000 Eight direction keys are supported
Operation speed using icon
P19 Button sewing speed 3
after the button is pressed
(mm/min) 100 to 20000 1000 Eight direction keys are supported
Operation speed using icon
P174 Machine head 2 speed
(mm/s) 0 to 2000 0 XY axis speed in the case of using a
laser knife, etc.
P175 Machine head 3 speed
(mm/s) 0 to 2000 0 XY axis speed in the case of using a
laser knife, etc.
P178
Continuous inching speed Reduce / mini
-
mum / standard
Reduce
Travel speed during pattern creation
P773 Number of revolutions in
the reverse direction (r/
min) 0 to 3000 0
Reverse feed stitching speed
P774 Number of stitches to be
sewn at a limited speed at
the end of sewing 0 to 30 0 Setting of the number of stitch from
which the sewing speed is limited at
the end of sewing a pattern
P775 Limited sewing speed to
be employed at the end of
sewing 100 to 1800 0 This parameter is used in combination
with P774 to obtain the specific limited
speed value.
Clamp
setting
P22 Prohibition of sewing
during lifting of the clamp Yes/No Yes Prohibition of sewing during lifting of
the cassette clamp
P25 Thread clamp starting
angle at the beginning of
sewing 1 to 990 300 Thread clamp ON angle at the begin-
ning of sewing
P26 Thread clamp ending angle
at the beginning of sewing 1 to 990 300 Thread clamp OFF angle at the begin-
ning of sewing
P27 Thread clamp starting an-
gle during thread trimming 1 to 990 10 Thread clamp starting angle during
thread trimming
P28 Thread clamp ending angle
during thread trimming 1 to 990 170 Thread clamp ending angle during
thread trimming
P781 Whether or not the clamp
is required during travel Yes/No Yes
P743
Clamp lowering at the time
of resetting
0 to 10000 ms 0
P744
Clamp lifting after the man
-
ual resetting.
0 to 10000 ms 0
Bobbin
winder
setting
(limited to
the 6045
model) P29 Bobbin winder status Allowed / pro-
hibited Allowed Bobbin winder
Default state
P30 Winding speed (r/min) 100 to 4500 2200 Bobbin winding speed setting
P31 Bobbin winding time setting
(s) 1 to 63000 200 Time setting of bobbin winding setting